View TFS86A_1324732.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TFS86A.doc
version 1.1 06.01.02 ______________________________________________________________________________________________________
VI TELEFILTER Filter Specification TFS 86 A 1/4 ______________________________________________________________________________________________________
Measurement condition Ambient temperature: 23
Generated: Checked / approved:
Input power level: Source impedance: Load impedance:
0 dBm 850 II -2 pF 850 II -2 pF
Construction and pin configuration see page 2 Characteristics Remark:
Reference level for the relative attenuation arel of the TFS 86 A is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fo is the arithmetic mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 86,85 MHz without tolerance. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo.
Data
______________________________________________________________________________________________________ max 4 dB ae = amin Insertion loss (Reference level) ______________________________________________________________________________________________________ 86,85 MHz fN Nominal frequency ______________________________________________________________________________________________________ 86,85 MHz Centre frequency fo ______________________________________________________________________________________________________ Pass band ripple 13 kHz max. 1,5 dB fN ______________________________________________________________________________________________________ Relative attenuation arel 15 kHz max. 3 dB fN min. 50 dB fN - 1000 kHz ... fN - 940 kHz min. 70 dB fN - 940 kHz ... fN - 880 kHz min. 50 dB fN - 880 kHz ... fN - 400 kHz min. 40 dB fN - 400 kHz ... fN - -120 kHz 60 kHz min. 20 dB fN - 120 kHz ... fN min. 20 dB fN + 60 kHz ... fN + 120 kHz min. 40 dB fN + 120 kHz ... fN + 150 kHz min. 30 dB fN + 150 kHz ... fN + 400 kHz min. 40 dB fN + 400 kHz ... fN + 1000 kHz ______________________________________________________________________________________________________
GDD Group delay distortion 11 kHz max. 10 s fN ______________________________________________________________________________________________________
typ. value
tolerance / limit
Intermodulation Intermodulation in the composite signal by max. -90 dBm fN 60 kHz and fN 120 kHz each of -20 dBm ______________________________________________________________________________________________________ Operating temperature range - 20 C ... + 70 C Storage temperature range - 40 C ... + 85 C ______________________________________________________________________________________________________ ca. - 0,036 ppm/K Temperature coefficient of frequency TC ______________________________________________________________________________________________________ Frequency inversion temperature + 20 C ... + 30 C ______________________________________________________________________________________________________ max. 10 V Permissible DC voltage VDC ______________________________________________________________________________________________________
______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS86A.doc
version 1.1 06.01.02 ______________________________________________________________________________________________________
VI TELEFILTER Filter Specification TFS 86 A 2/4 ______________________________________________________________________________________________________
Construction and pin configuration
TFS 86 A tft L1
-
R0.15
4 5 9 10 1,2,3,6,7,8
Output Output RF return Input Input RF return Ground
Note: The filter has the same impedance for input and output. The orientation of the marking referring to soldering pads can deviate from filter to filter. The orientation of marking and/or soldering pads can change from filter to filter also in case of tape & reel and is not defined in any way. Only the mounting surface of the filters faces the bottom side of the embossed carrier tape.
50 matching network
C1 Input 50 Ohm 9 5
L1
SAW
10 4 C2 L1 1,2,3,6,7,8 L2
Input Output 50 Ohm 50 Ohm
9
5
SAW
10 C1 4
L2
Output 50 Ohm
C2
1,2,3,6,7,8
Note: The filter operates in the matching network in the same manner if the filter is inserted with a rotation of 180 .
Stability Characteristics
______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS86A.doc
version 1.1 06.01.02 ______________________________________________________________________________________________________
VI TELEFILTER Filter Specification TFS 86 A 3/4 ______________________________________________________________________________________________________
After the following tests the filter shall meet the whole specification: 1. Shock: 30g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,075 mm or 1g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 90 % to 95 % rel. humidity, 40 C, 10 days; DIN IEC 68 - 2 - 3
2. Vibration:
3. Damp heat: (steady state) 4. Resistance to solder heat (reflow):
max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on sheet 4;
Packing
Tape & Reel: DIN IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 1700
Tape (all dimensions in mm) W Po Do D1 : : : : 24 4 1,5 1,5 0,3 0,1 + 0,5 + 0,5
EMBOSSED CARRIER TAPE
Do
Po
P2
E Ao F W
E : F : G (min) : P2 : P1 : D1(min) : Ao Bo : :
1,75 0,1 11,5 0,1 0,75 2 0,1 12 0,1 1,5 7,1 13,9 0,2 0,2
D1 21,4
0,1
Bo
G
P1
COVER TAPE
W2
Reel (all dimensions in mm): A W1 W2 (max) : N (min) C : : : : 330 24,4 +2 30,4 >= 90
C A N
13
0,25
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape.
Air reflow temperature conditions
______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
version 1.1 06.01.02 ______________________________________________________________________________________________________
TFS86A.doc
VI TELEFILTER Filter Specification TFS 86 A 4/4 ______________________________________________________________________________________________________
1st and 2nd air reflow profile
Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120
______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

▲Up To Search▲

Price & Availability of TFS86A

	To Download TFS86A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .